0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-11-07 22:04:31
517
38
Report

Gifts at the Door | Snowy Christmas House

@drakeforge3d_5567152
Message
Follow
Description

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

 

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.



Fresh snow has settled on the roof, a wreath hangs on the front door, and a few ribbon-tied presents wait beside the steps. This miniature cottage captures the quiet of a Christmas village just before everyone wakes up. Rounded drifts soften the roofline and cap the brick chimney, while the little dormer, round attic window, and front bay window give the house its storybook charm. Snow-covered firs stand close to the walls, as though the cottage were tucked into a sheltered corner of the village.

Set it among miniature evergreens and warm fairy lights to create a snowy Christmas Eve scene, or display it on its own beside a garland on the mantel. In matte white, the cottage has the look of a winter keepsake. Soft side lighting brings out the overlapping roof tiles, the garland around the doorway, and the bows on the tiny gifts.

Print note. Designed for FDM 3D printing with supports.


   Guide

 

 

 

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

 

 

 


1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

 

 

 

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

 

 

  • Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
  •  
  •  
  • Recommendations:

  •  
  • 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
  •  
  • PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
  •  
  • Clean the plate thoroughly before printing.
  • Make sure the filament is dry and free from dirt. This can damage the print or weaken the support


Tags
Gifts
Snowy
Christmas House
Toy
Art
Decor
Christmas decor
Christmas village
Christmas cottage
Christmas house
Snowy cottage
Christmas wreath
Holiday shelf decor
Winter centerpiece
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.